DIN EN 1993-5 Berichtigung 1-2009 欧洲法规3:钢结构的设计.第5部分:打桩工程.技术勘误DINEN1993-5-2007

作者:标准资料网时间:2024-05-14 03:42:12 浏览:9081 来源:标准资料网

【英文标准名称】:Eurocode3:Designofsteelstructures-Part5:Piling;GermanversionEN1993-5:2007,CorrigendumtoDINEN1993-5:2007-07;GermanversionEN1993-5:2007/AC:2009
【原文标准名称】:欧洲法规3:钢结构的设计.第5部分:打桩工程.技术勘误DINEN1993-5-2007
【标准号】:DINEN1993-5Berichtigung1-2009
【标准状态】:作废
【国别】:德国
【发布日期】:2009-12
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:锚具;组件;建筑;施工工程作业;设计;尺寸选定;耐久性;欧洲法规;适用性;扁钢;基础;荷载能力;材料性能;材料;机械性能;桩基础;打桩工程;挡土墙;钢板桩;薄钢板;不锈钢;钢架结构;钢;钢结构作业;结构
【英文主题词】:Anchorages;Components;Construction;Constructionengineeringworks;Definitions;Design;Dimensioning;Durability;Eurocode;Fitnessforpurpose;Flatbars;Flatsteels;Foundations;Loadcapacity;Materialproperties;Materials;Mechanicalproperties;Pilefoundations;Piling;Retainingwalls;Sheetpilings;Sheetsteels;Stainlesssteels;Steel-framedconstructions;Steels;Structuralsteelwork;Structures
【摘要】:
【中国标准分类号】:P26
【国际标准分类号】:91_010_30;91_080_10
【页数】:4P.;A4
【正文语种】:德语

下载地址: 点击此处下载

返回跳至顶部

上一篇: DIN EN 1993-1-7 Berichtigung 1-2009 欧洲法规3:钢结构的设计.第1-7部分:受平面承载以外的电镀结构.技术勘误DINEN1993-1-7-2007
下一篇: DIN EN 1993-1-3 Berichtigung 1-2009 欧洲法规3:钢结构的设计.第1-3部分:一般规则.冷成型模和薄板材用补充规则.技术勘误DINEN1993-1-3-2007

【英文标准名称】:Paintsandvarnishes-Determinationofthepotlifeofmulticomponentcoatingsystems-Preparationandconditioningofsamplesandguidelinesfortesting(ISO9514:2005);GermanversionENISO9514:2005
【原文标准名称】:色漆和清漆.多组分涂覆系统适用期测定.样品的制备和处理以及试验指南
【标准号】:DINENISO9514-2005
【标准状态】:现行
【国别】:德国
【发布日期】:2005-07
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:试样;状态调节;轴承;储存;导则;试验;最大寿命;定义;材料试验;测量;涂料;测量技术;操作时间;实验室试验;耐久性;试样制备;覆层材料;抽样方法;覆层;活性;储存质量;测定;清漆
【英文主题词】:
【摘要】:Thisdocumentspecifiesamethod,carriedoutunderstandardconditions,forpreparingandstoringasampleofamulitcomponentcoatingsystemandsubsequentlyassessingitspot-lifebymeasuringaparticularproperty/ies.
【中国标准分类号】:G51
【国际标准分类号】:87_100
【页数】:14P;A4
【正文语种】:德语

Product Code:SAE J2534/1
Title:Recommended Practice for Pass-Thru Vehicle Programming
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope:This SAE Recommended Practice provides the framework to allow reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle data link interface tools from multiple tool suppliers. This system enables each vehicle manufacturer to control the programming sequence for electronic control units (ECU's) in their vehicles, but allows a single set of programming hardware and vehicle interface to be used to program modules for all vehicle manufacturers. This document does not limit the hardware possibilities for the connection between the PC used for the software application and the tool (e.g., RS-232, RS-485, USB, Ethernet...). Tool suppliers are free to choose the hardware interface appropriate for their tool. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with hardware supplied by any tool manufacturer. The U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (ARB) have proposed requirements for reprogramming vehicles for all manufacturers by the aftermarket repair industry. This document is intended to meet those proposed requirements for 2004 model year vehicles. Additional requirements for the 2005 model year may require revision of this document, most notably the inclusion of SAE J1939 for some heavy-duty vehicles. This document will be reviewed for possible revision after those regulations are finalized and requirements are better understood. Possible revisions include SAE J1939 specific software and an alternate vehicle connector, but the basic hardware of an SAE J2534 interface device is expected to remain unchanged.